PMG, Inc. offers a variety of products to assist you with your specific security
needs. In addition to our RoadBlade tire shredders, a bi-directional tire
shredding system, we offer a directional spike system. Our directional tire
spikes, also known as one way tire treadles, are used to control the flow
of traffic in a single direction. In other words, vehicles may enter, but
not exit. Some facilities require hard-stopping security systems such as wedge
barriers or hydraulic bollards, to secure their gates and entrances. Our line
of wedges, bollards, and more can assist you in customizing your physical
security at your facility. If you do not find what you are looking for contact
us at (888) 876-2377 and we will find it for you.
RB-36 or 36LD (Latching) Directional traffic controller
Surface Mount Application
The directional spike system is used to control traffic
in one direction. Vehicle may enter, but not exit
without severe tire damage. Spring loaded spikes
remain up and easily go down when vehicles pass
over the system in the correct direction; however, if
passing over it in the opposite (incorrect) direction,
all tires will be sliced.
• Surface mounted spike system also serves as a
speed bump to slow down the flow of traffic.
• Easily installed to the existing roadway.
• No excavating or asphalt cutting is required.
• Low profile for smooth passage.
• Fabricated in 3 Ft.sections to customize lane width.
• All welded construction.
• 1/4" thick hot rolled steel for "lasting durability".
• Color: Traffic safety red for easy visibility.
Click
here for RB-36 specifications. (PDF)
Click
here for RB-36LD specifications. (PDF)
RB-72 or 72LD(Latching) Directional traffic controller
Flush Mount Application
The flush mount directional spike system offers the
same features as the surface mount; however, it is
designed to sit flush with the road surface. This
system is ideal for permanent installations.
• System is installed flush with the road surface
for a low profile, allowing smooth passage.
• Easily installed to the existing or newly constructed
roadway.
• Minimal excavating or asphalt cutting is required.
• Low profile for smooth passage.
• Fabricated in 6 Ft.sections to customize lane width.
• All welded construction.
• 1/4" thick hot rolled steel for "lasting durability".
• Also available in a heavy duty system - Model RB-72HD
• Color: Traffic safety red for easy visibility.
Click
here for RB-72 specifications.
Click
here for RB-72LD specifications.
